Minitronics v1.1 - Controller board
This product has been discontinued and stock will not be replenished once it runs out. Check the product information for an alternative or contact our sales department.
Compact single-board 3D printer controller with stepper drivers included on-board
- Dispatch same business day!
- 2.000+ products available from stock
- More than 25.000 satisfied customers in over 40 countries
- Secure payment for all payment options
- Professional tech support (over 7 years 3D experience)
Price breaks
| 1 - 9: | excl € 49.00 |
| 10 - 29: | excl € 46.55 |
| 30 - : | excl € 44.10 |
| Need a larger quantity? Contact our Sales department. | |
Product description
Compact single-board 3D printer controller with stepper drivers included on-board
Minitronics is our answer for the low-end 3D printer range. It's designed to be an easy to use, compact and smart solution to fit 90% of the 3D-printers. Unlike it's bigger brothers Megatronics and Ultratronics, which target at the high-end range, the Minitronics is your best choice for an affordable 3D printer controller but still with high quality components.
The board has a powerful Atmega1281 processor with 128 KB memory, running at 16Mhz and can be connected to a PC using a normal USB cable. The board is compatible with Arduino and will therefor be easily programmed from the Modified Arduino IDE, which you can download in our software downloads section. We provide firmware that's ready to run with the board, but you need to adjust the settings or your machine.
Major features
Atmega1281
Powerful Atmega1281 processor with 128 KB memory, running at 16Mhz
Small design
Only 94x57x18mm in size
Thermistors
Two thermistors can be connected
Four MOSFETs
The board has 3 regular MOSFETs (for extruders etc) and one MOSFET for the heated bed (10A) to support
many needs.
Up to 5 stepper drivers with 1/32 step
The Minitronics has four on board stepper drivers. A fifth can be connected externally, using
our External stepper driver board.
Other features
- USB 2.0 Full Speed compatible
- Auto reset can be disabled by removing a jumper
- The board can be powered from 12V (12V MAX), by setting a jumper
- 12V has a diode to protect against reverse polarization
- The 5V line is protected by a 500mA resettable fuse
- Four layer high quality PCB board
Board dimensions
Width: 94mm
Length: 57mm
Height: 18mm
Datasheet: http://reprapworld.com/datasheets/datasheet%20minitronics%20v1.pdf
Marlin firmware: See software download section
About ReprapWorld
The ReprapWorld Brand contains high-value products for the best 3D print experience. Selected for the amateur and pro alike, these products will make your life easier. By choosing for ReprapWorld products, you are certain to get a great quality product for a great price. The brand includes products of our own design as well as products tested by us.
Specifications
Documentation
What's in the box?
This is a kit of the following items.
| Quantity | Stock | Product |
|---|---|---|
| 1x | 4-wire cable with ATX connector (50cm) | |
| 1x | Axial Fan 40x40x10mm ( 12 V ) | |
| 1x | Minitronics v1.1 - Board |
Alternatives
Open source, Arduino-compatible, controller board for your 3D printer or CNC machine
The DuetWifi is an advanced 32 bit electronics board for the control of 3D printers and other CNC machines.
Compact, affordable, single-board solution with on-board stepper drivers. 32-bit SAMD21 Microprocessor running at 40Mhz, well capable of running even Delta printers at decend speeds.
Add-ons
High heat resistance and sensitive 100K Ohm NTC thermistor for hot-end and heated bed
Small USB wire. Great for connecting your elexctronics to the raspberry PI for example.
