This board enables you to switch high currents (15A max) using a relay, as many 3D printer electronics is not able to provide these current safely.
This is a Do It Yourself (DIY) kit, please read the assembly guide.
- Switch up to 24V and 15A
- Relay is controlled using 12V input (12V Min and Max)
- LED's indicate power and status
This kit comes with everything needed to assemble it.
|1 - 4:||excl € 20.04 incl € 24.25|
|5 - 9:||excl € 19.04 incl € 23.04|
|10 - :||excl € 18.04 incl € 21.83|
|Need a larger quantity? Contact our Sales department.|
This is a kit of the following items.
|2x||2-way Screw terminal housing ( 16A )|
|2x||Axial Carbon Resistor 180Ohm ±5% 0.25W|
|1x||LED - 5mm - Green|
|1x||LED - 5mm - Red|
|1x||Power relay PCB|
|1x||Relay 12V, 30A|