Easy assembly of you extruder
This is our 100K thermistor pre-crimped on a wire. This wire can handle up to 280 degrees, so you can print either ABS or PLA with it. It has a molex connector which fits nicely on Minitronics
Specifications
Length: 1m
Max temperature: 280 degrees
Length fiberglass sleeve: 4cm
Thermistor specs
Features
Glass-encapsulated, heat-resistive and highly stable
For temperature measurement up to 250 °C
Fast response
Small dimensions
Datasheet: http://reprapworld.com/datasheets/B57550G104J.pdf
Description of Terminals | 0.15mm dia. x 65mm Straight Lead |
Maximum Power Rating | 18mW |
Mounting | Through Hole |
Pin Count | 2 |
Product Diameter | 0.8mm |
Product Height | 1.4mm |
Sensitivity Index | 4066K |
Thermal Coefficient | 4.5%/°C |
Thermal Time Constant | 3s |
Type | NTC |
1 - 4: | excl € 5.49 |
5 - 9: | excl € 5.21 |
10 - 29: | excl € 5.07 |
30 - : | excl € 4.94 |
Need a larger quantity? Contact our Sales department. |
Discover products that go hand in hand with the Thermistor 100K pre-crimped wire (1m). These are products that have been purchased the most with the Thermistor 100K pre-crimped wire (1m). Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.