Buy 3D extruder parts and components in NL

View RepRapWorlds collection of extruder parts and components. Find all the parts you need to assemble your extruder and discover the perfect nozzle for your 3D prints. Explore all the essential pieces of an extruder and the different supporting components for the best printing experience.

3D extruder components

The extruder is a crucial part of a 3D printer, consisting of a series of smaller components. The function of the extruder is to extrude filament through the 3D printer’s nozzle. The extruder is sometimes also referred to as the cold end since it is located at the top of the extrusion system before the filament is heated. A 3D printer’s extruder is supported by several parts. The stepper motors and gears will guide the filament in an extruder and the thermistor will regulate and provide the intended temperatures. Cooling the extruded filament is crucial to improve overhang and smaller details and this is typically done by a part cooling fan. If you would like to upgrade your 3D printer fans you can find high airflow 3D fans in the fans and cooling section. There are many mechanical parts like the bolts and nuts available, and they ensure that everything is put together and in place to successfully extrude filament.

3D Temperature sensors

Temperature sensors are electronic parts known as thermistors and thermocouples that measure temperatures in their surroundings. Thermistors are fully referred to as thermally sensitive resistors. In an FDM/FFF 3D printer, you can find a thermistor in the heated bed​​ and the heat block. Thermistors and thermocouples convert information back to the controller which in turn reacts and instructs them further. The firmware has to be constantly aware of the thermistors and thermocouples to ensure that temperatures are maintained throughout prints based on G-code instruction and to also avoid overheating. We offer a range of thermistors and thermocouples that you can easily integrate into your DIY 3D printer kit or use to upgrade your 3D printer. They play a crucial role as their communication tells the 3D printer what temperature is currently being used. To achieve successful 3D prints the temperature must be set correctly and communicated effectively back and forth to the firmware. When thermistors and thermocouples are faced with hot temperatures for extremely long periods, they will alter and present lower temperatures than in reality. Find premium thermistors and thermocouples from our assortment.

Heater cartridges

Heater cartridges are another important component for 3D printers. They ensure that your hot end reaches the intended temperature as fast as possible. A heater cartridge is a heating element that allows your nozzle to be a hot end and melt filament accordingly. TIP: For a fast and accurate heat transfer between the heating element of your 3D printer, you can use the heat transfer pad for optimal heat transfer. Choose the voltage that suits your 3D printing activities best. 40 watts is the most popular wattage selected enabling the hot end to quickly go to a temperature of 300°C. This works for most 3D filaments, however, if you are looking to print with industrial-level filaments such as PEEK, PEI, and PPSU, you will require a heater cartridge with a higher wattage. If you would like to know more about filament materials and what temperature they print best read our guide to 3D filament.

Filament detection

Without filament detection, the status and of the filament would be unknown in relation to the 3D printer. Filament detection sensors and monitors are extremely useful and will notify you when the filament is broken or has run out during a print. The 3D printer will pause and save its current progress. If a printer does not pause when the filament runs out, this can cause the hotend to overheat and clog the nozzle or PTFE tubing. Avoid failed prints with filament detection, and pick up where you left off after loading more filament.

Bowden extrusion

FDM/FFF 3D printers have two printing techniques; the direct drive and the Bowden system. A Bowden extrusion system is the most commonly used technique for 3D printing. What distinguishes the systems from one another is the positioning of the cold end. A Bowden 3D printer will have the extruder placed on the frames and bars instead of being directly attached to the hot end. There are many advantages when 3D printing using the Bowden technique. The distancing of the extruder head and hot end means that you can 3D print without additional weight on the 3D printer’s nozzle. For this reason, 3D printing is also achieved faster and with more precision. There are also certain disadvantages when printing with the Bowden extrusion system. For example, printing flexible filament is difficult and requires more retraction in order to avoid stringing. In this section, you will be able to come across all the different items for a Bowden extrusion system. Find PTFE tubing in a range of diameters and lengths.

Select the best nozzle for your 3D printer

3D printer nozzles or hot ends push out the melted filament onto your print surface. Choosing the right nozzle for your 3D model will significantly benefit the print and avoid clogging. Using a standard brass nozzle will not work for every material. Some abrasive materials like carbon filament will require an upgrade to a hardened steel nozzle or ruby tip nozzle to avoid wearing or damage of the 3D printer’s components. View our wide variety of nozzles and find options for every printing occasion or DIY 3D printer project.

Do you have questions about any extruder parts or components? Feel free to reach out to our customer service team, we are happy to help!

Why ReprapWorld?
  • Orders dispatched same business day
  • 3.000+ products in our assortment
  • More than 45.000 satisfied customers in over 40 countries
  • Secure payment for all payment options
  • Professional tech support (over 10 years 3D experience)
Pay safely using

Copyright 2009 - 2023 | ReprapWorld