Capricorn

Capricorn is a manufacturer of high quality PTFE tubing for consumer grade and DIY 3D printers. Compared to cheaper brands, both TL and XS tubing reduce friction, and thus the residual effects of pressure buildup, in bowden systems for high speed printing. XS tubing provides a slightly lower friction coefficient along with tighter diameter tolerances for 1.75 mm filament, and thus is the recommended choice for higher quality filament brands. XS tubing is less translucent than TL, but allows for higher temperature filaments for hotends in which the tubing extends into the heater block (most Chinese designs do this).

Official Capricorn XS PTFE tubing set for Creality 3D printers
 
 
€ 24.38
In stock 
Official Capricorn TL PTFE tubing set for Creality 3D printers
 
 
€ 24.38
In stock 
Capricorn - Premium cutting tool for PTFE tubes
 
 
€ 10.33
In stock 
Official Capricorn XS 2 Meter PTFE tubing for 2.85 mm w/ Cutters
 
 
€ 40.91
In stock 
Official Capricorn XS 1 Meter PTFE tubing for 2.85 mm w/ Cutters
 
 
€ 26.86
In stock 
Official Capricorn XS 2 Meter PTFE tubing for 2.85 mm
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 3.0mm (± .05mm)
  • OD: 6.4mm
 
 
€ 31.82
In stock 
Official Capricorn XS 1 Meter PTFE tubing for 2.85 mm
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 3.0mm (± .05mm)
  • OD: 6.4mm
 
 
€ 17.77
In stock 
Official Capricorn TL & XS 2 Meter PTFE tubing for 2.85 mm
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 3.2mm (± .05mm)
  • OD: 6.4mm
 
 
€ 61.57
In stock 
Official Capricorn TL & XS 1 Meter PTFE tubing for 2.85 mm
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 3.2mm (± .05mm)
  • OD: 6.4mm
 
 
€ 33.47
In stock 
Official Capricorn TL 2 Meter PTFE tubing for 2.85 mm w/ Cutters
 
 
€ 40.91
In stock 
Official Capricorn TL 1 Meter PTFE tubing for 2.85 mm w/ Cutters
 
 
€ 26.86
In stock 
Official Capricorn TL 2 Meter PTFE tubing for 2.85 mm
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 3.2mm (± .05mm)
  • OD: 6.4mm
 
 
€ 31.82
In stock 
Official Capricorn TL 1 Meter PTFE tubing for 2.85 mm
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 3.2mm (± .05mm)
  • OD: 6.4mm
 
 
€ 17.77
In stock 
Official Capricorn XS 2 Meter PTFE tubing for 1.75 mm w/ Cutters
 
 
€ 28.51
In stock 
Official Capricorn XS 1 Meter PTFE tubing for 1.75 mm w/ Cutters
 
 
€ 20.25
In stock 
Official Capricorn XS 2 Meter PTFE tubing for 1.75 mm
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 19.42
In stock 
Official Capricorn XS 1 Meter PTFE tubing for 1.75 mm
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 11.16
In stock 
Official Capricorn TL & XS 2 Meter PTFE tubing for 1.75 mm
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 36.78
In stock 
Official Capricorn TL & XS 1 Meter PTFE tubing for 1.75 mm
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 20.25
In stock 
Official Capricorn TL 2 Meter PTFE tubing for 1.75 mm w/ Cutters
 
 
€ 28.51
In stock 
Official Capricorn TL 1 Meter PTFE tubing for 1.75 mm w/ Cutters
 
 
€ 20.25
In stock 
Official Capricorn TL 2 Meter PTFE tubing for 1.75 mm
  • 200cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 19.42
In stock 
Official Capricorn TL 1 Meter PTFE tubing for 1.75 mm
  • 100cm low friction PTFE
  • Flexible and low stretch
  • For 1.75mm filament
  • ID: 1.9mm (± .05mm)
  • OD: 4.0mm
 
 
€ 11.16
In stock 
Official Capricorn XS Heat Break Liner for 1.75 mm (30cm)
High quality heat break liner
  • Inside Diameter: 2mm
  • Outside Diameter: 3mm
  • Color: Deep blue
  • Max temperature: 250 degrees
 
 
€ 9.88
In stock 
Why ReprapWorld?
  • Orders dispatched same business day
  • 3.000+ products in our assortment
  • More than 45.000 satisfied customers in over 40 countries
  • Secure payment for all payment options
  • Professional tech support (over 10 years 3D experience)
45.000+ satisfied customers

4.4 stars on Google

Pay safely using


About ReprapWorld
ReprapWorld

ReprapWorld is the number one webshop for all your reprap supplies for your 3D printer. We have a large collection of 3D printer components, from our famous electronics lines to filament from our own production. And everything is at a very competitive price!

Copyright 2009 - 2021 | ReprapWorld