DueX 5-channel expansion board

Expansion board for the Duet electronic controller boards adding support for 5 axis
  • Original Duet 2 expansion board
  • Five TMC2660 stepper drivers
  • Five heater outputs and endstops
Stock - NL: 1
€ 107.39  excl VAT In stock
Only 1 left, order now!

Product description

Expansion board for the Duet 2 electronic controller boards that can be easily connected using the included 50-way connector cable. This board allows you 3D printer or CNC machine to be expanded with another five axis, so for example color mixing will now be a possibility.

Main features

  • 5x additional TMC2660 stepper motor drivers with stall notification.
  • 5x additional extruder heater outputs.
  • 5x servo outputs with 5V power and 5V signal levels, sharing control channels with the heaters, so you can use unused heater channels to drive servos.
  • 5x additional endstop inputs with indicator LEDs and 3.3V/5V voltage selection. These are also usable as outputs.
  • 5x additional controlled fan outputs, also usable for driving LEDs etc. The output voltage may be switched between 5V, 12V and VIN.
  • 4x uncommitted general purpose I/O pins.
  • 12V switching regulator, for generating a 12V supply for fans, LEDs etc. when the VIN power is higher than 12V.
  • 5x additional thermistor inputs.
  • Support for 2 more thermocouple or PT100 daughter boards, supporting up to 4 more sensors.
  • Optional 5V external power input for powering servos, fans etc.

The board is supplied with a 50-way connector cable between the Duet 2 Wifi and the Duex5.



gtin 8719345006111
mpn Duex_5_v0.11
Thermistors 5
Endstops 5
Stepper drivers 5

Copyright 2009 - 2023 | ReprapWorld