Ultrabase carbon build plate
310x320x4mm

Ultrabase Silicon Carbon coated glass build surface upgrade. Gives a great adhesive for all the major plastics: PLA, PETG an ABS

This official Creality Ultrabase coated heated bed plate is potentially the last heater bed upgrade you'll ever need. The hight quality Silicon Carbon coating can handle temperatures up to 120 deg C, and is one of the few materials that works with all primary thermoplastics: PLA, PETG and ABS.

Since adhesion is so univerally strong, don't oversquash your first layer. Wear and tear is reduced when allowing the bed to cool down to under 40 deg (or 50 for ABS) before print removal. The optimal z-height will allow prints to pop off once the bed has cooled.

When using the Creality Ultrabase there is no additional adhesives required. Because of the honeycombed carbon layer your print will automatically stick very well. When the print is finished give it about 15 minutes to cool down up to room temperature and the print will pop-off the bed it self. Before printing please level the bed to ensure no damage is going to get caused to the carbon layer.Ultrabase Silicon Carbon coated glass build surface upgrade for CR-10S Pro. Gives a great adhesive for all the majour plastics: PLA, PETG an ABS

It is compatible with the next printers:

• CR-10S Pro (V2)
• CR-10 V2 (V3)
• CR-X
• Ender 3 Max