NinjaTek Cheetah TPE 560 is high quality semi-flexible filament. It is suitable for all 3D printers in creating strong and flexible prints. Easier and faster to print then NinjaFlex and great for printing soft, wear resistant 3D prints.
The filament can be printed using any 3D printer, but the filament path must be fully encapsulated; printable with practice on bowden systems at slower speeds. For bowden systems printing is very difficult and for advanced users who like a challenge only.
NinjaTek's new strong, semi-flexible filament is capable of printing much faster and cleaner than NinjaFlex without much impact to material stiffness. The operating temperature is in the range of 230 - 250 deg °C. Other properties are as follows:
TPE is a generic term for flexible 3D printer filaments, this material is branded as TPU, which is a subset of the TPE and is a bit firmer. Best is to look at the shore for comparing flexible filament. For more information, please check the TPE/TPU information page.
|Weight filament||500 g|
The base material used in the filament. For more information on the different materials, please check the Filament information page
|Color (on label)||Water|
|Diameter tolerance||0.05 mm|
|Temperature - extruder||230 -250 °C|
|Temperature - heated bed||20 - 50 °C|
|Outer diameter||200 mm|
|Inner diameter||50 mm|
|1 - 9:||excl € 37.15|
|10 - 29:||excl € 35.29|
|30 - :||excl € 33.43|
|Need a larger quantity? Contact our Sales department.|
Discover products that go hand in hand with the Cheetah Flexible 3D filament - Neutral (Water) 1.75 mm / 0.5 kg. These are products that have been purchased the most with the Cheetah Flexible 3D filament - Neutral (Water) 1.75 mm / 0.5 kg. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.